CDZTX - EUTALLITE UNIVERSAL, 10092

  • MSDS: CDZTX
  • Manufacturer: EUTECTIC CORP
  • Product Name: EUTALLITE UNIVERSAL, 10092
  • National Stock Number: 3439-00-476-5360
Product Identification

Product ID:EUTALLITE UNIVERSAL, 10092
MSDS Date:03/15/1993
FSC:3439
NIIN:00-476-5360
MSDS Number: CDZTX

Responsible Party
EUTECTIC CORPORATION
40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 800-424-9300

Info Phone: 718-358-4000

Cage: EO060

Contractor
EUTECTIC CORPORATION
CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: EO060

Ingredients

COBALT (SARA 313)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 30-40%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.02 MG/M3; A3; 9495


CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20-30%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9495

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 25-35%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9495


BORON

CAS: 7440-42-8

RTECS: ED7350000

OSHA PEL 10 MG B203/M3

ACGIH TLV: 10 MG B2O3/M3


SILICON

CAS: 7440-21-3

RTECS: VW0400000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495


CARBON

CAS: 7440-44-0

RTECS: FF5250100

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9495


TUNGSTEN,AS W,SOLUBLE COMPOUNDS.

CAS: 7440-33-7

RTECS: YO7175000

OSHA PEL N/K

ACGIH TLV: 1 MG/M3/3 STEL; 9495


IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)


REASONABLY EXPECTED CONSTITUENTS OF FUME MAY

RTECS: 9999999ZZ


MAY PRDCE FLUORIDE CMPDS, METAL OXIDES, CARBON &

RTECS: 9999999ZZ


MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES, & CERTAIN

RTECS: 9999999ZZ


DETERM COMPOSITION & QUANTITY OF FUMES & GASES TO

RTECS: 9999999ZZ


INSIDE THE WORKER'S HELMET IF WORN/IN THE WELDER'S

RTECS: 9999999ZZ


PNEUMOCONIOSIS/SIDEROSIS. METAL FUME

RTECS: 9999999ZZ


OPERATIONS. SYMPS ARE SIMILAR TO INFLUENZA TYPE

RTECS: 9999999ZZ


TIGHTNESS OF CHEST, DRYNESS OF NOSE & MOUTH,

RTECS: 9999999ZZ


SEVERAL HRS AFTER OVEREXP & MAY LAST 6-24 HRS. BORON

RTECS: 9999999ZZ


SYS,EYES & ON OPEN SKIN WOUNDS. INGEST MAY CAUSE

RTECS: 9999999ZZ


SHORT TERM OVEREXP FROM INHAL

RTECS: 9999999ZZ


& ASTHMA LIKE SYMPS. SWALLOWING CHROMIUM VI SALTS

RTECS: 9999999ZZ


ULCERS. EYES MAY BE BURNED BY CHROMIUM VI CMPDS.

RTECS: 9999999ZZ


WORKERS EXPOSED TO HEXAVALENT CHROMIUM CMPDS HAVE AN

RTECS: 9999999ZZ


SYSTEMATIC POISONING PRIMANLY AFFECTING KIDNEYS &

RTECS: 9999999ZZ


IARC MONOGRAPHS ON EVALUATION OF

RTECS: 9999999ZZ


GROUP 2B. NTP 7TH ANNUAL REPORT ON CARCINOGENS,

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES CAN BE DANGEROUS TO YOUR
HLTH & OVEREXP CAN CAUSE LUNG DMG &/OTHER ORGAN DMG. EYE/SKIN
CNTCT:ARC RAYS & ULTRAVIOLET LIGHT CAN INJURE EYES & BURN SKIN. LIQ
USE IN FLUXES & CHEM AIDS MAY CAU SE IRRIT/POSS CHEM BURNS. ELEC
SHOCK CAN KILL. INGEST:DANGER! MAY BE HARMFUL OR FATAL IF
SWALLOWED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:COBALT:IARC MONOGRAPHS ON THE EVALUATION
OF CARCIN RISK OF CHEMICALS TO MAN, VOL 52, PG 363, 1991: GROUP 2B.
(ING 24)
Effects of Overexposure:HLTH HAZ:GENERAL WELDING FUMES:FUMES, GASES &
DUSTS CAN BE DANGEROUS TO YOUR HLTH. MED STUDIES HAVE SUGGESTED
THAT LUNG DMG CAN RSLT FROM OVEREXP TO THESE FUMES. SHORT TERM
OVEREXP MAY RSLT IN DIZZ, N AUS/DRYNESS/IRRIT OF NOSE,
THROAT/EYES.EXCESSIVE OVEREXP MAY CAUSE BRONCHIAL ASTHMA, LUNG
FIBROSIS, (ING 14)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CNTCT MD & ADVISE ON
INGREDS LISTED IN SECTION 2. SKIN:THORO WASH HANDS/EFFECTED AREAS
W/SOAP & H*2O TO REMOVE ALL RESIDUES. IF RASH/BURN DEVELOPS,
CONSULT MD. E YE:THOROUGHLY FLUSH EYES W/H*2O FOR AT LEAST 15 MIN
TO REMOVE ALL RESIDUE. OBTAIN PROMPT MED ADVISE FOR FLUXES & CHEM
AIDS. INGEST:CALL MD &/LOCAL POIS CTL CTR. ADVISE OF INGRED LISTED
IN SECTION 2.

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . TOXIC FUMES MAY BE PRODUCED-USE AN APPROVED SCBA.
Unusual Fire/Explosion Hazard:SOME FLUXES & CHEM AIDS MAY GIVE OFF
HYDROGEN CHLORIDE, PHOSGENE & CHLORINE GASES. REFER TO ANSI Z49.1
FOR FIRE PVNTN DURING USE OF WELDING & ALLIED (SUPDAT)

Accidental Release

Spill Release Procedures:DISPOSE OF WASTE MATERIAL IN AN
ENVIRONMENTALLY SENSITIVE MANNER IN ACCORDANCE WITH FEDERAL, STATE
AND LOCAL REGULATIONS. USE APPROPRIATE MEASURES TO KEEP AIRBORNE
DUST LEVELS CONTAINED IN ACCORDANCE WITH EXPOSURE LEVELS OF
SECTION 2.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:PLEASE READ & UNDERSTAND PROD LABEL INFO FOR PROPER
PROC & USE. SEE ANSI Z49.1 SAFETY IN WELDING & CUTTING & CHAPTER 11
OF THERMAL SPRAYING, PUBLISH BY THE AMERICAN WELDING SOCIETY AND
OSHA PUBLICATIO N 2206 (29 CFR 1910) FOR MORE DETAIL.

Exposure Controls

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORK'S BRTHG ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
FOR A COMPLETE LIST OF OTHER PROT EQUIP CONTACT NECH .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:PROCESSES. NONFLAMM UNDER NORMAL WORKING CNDTNS. METAL POWDER
DUST MAY PRESENT A FIRE/EXPLOSION HAZ UNDER FAVORABLE CNDTNS OF
PARTICLE SIZE, DISPERSION, & STRONG IGNIT SOURCE. THIS IS MOST P
REVALENT W/REACTIVE METAL POWDERS SUCH AS ALUMINUM. HAZ DECOMP
PROD:PLUS THOSE OF THE BASE METAL & COATING. (ING 9)

Chemical Properties

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:NO
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DECOMP PRODS OF NORM OPERATION INCL
THOSE ORIGINATING FROM VOLATILIZATION, RXN/OXIDATION OF MATLS IN
INGREDS, (SUPDAT)

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.